Gulliver Vertical Rise Lift

The Minilift* is the result of years of technical research and development with

special attention and paid to customer needs regarding safety and comfort.

The Minilift Gulliver can be perfectly adapted to wide variety of public and residential buildings.

The Minilift* Gulliver consists of shaft constructed with glass panels and a power-coated aluminium structure,enabling installation without the need of a masonry shaft.

The quality of materials used, the attention to detail and the various accessories available make the Minilift* Gulliver require very little space and no particular architectural changes(pit,header and machine room).

The Minilift* Gulliver Complies to the relevant European directives(D.M. 236/89, Machine Directive 98/37/CE-ex 89/392/CEE). It is certified to CE IMQ and TUV.

Technical specification

Control Panel and Cabin

Flow Covering

The above colours for the control panel, cabin and floor covering are simply an indication.For the exact colour tone,please refer to our samples.

Orion vertical Rise Lift

Orion is a vertical platform lift, which can be installed in a standard-build shaftway, with a minimum pit depth of 8cm.

The hyrdaulic lifting system is energy efficient.The width of the plateform can be tailored to your needs, from 66 cms to a maximum of 180cm.

Thanks to its innovative design,Orion is both quick and easy to install.The quality of materials used,as well as the large range of colours and finishes available,make Orion integrate perfectly into your surroundings.

Built in strict conformity with all current European norms,Orion is safe and reliable.

It is certified to CE,IMQ and TUV.

Technical specification

Control Panel and Cabin

Flow Covering

The above colours for the control panel, cabin and floor covering are simply an indication.For the exact colour tone,please refer to our samples.

Low Rise Platform Lift

To complement this product, the paint finish on the LR range is a high quality, architectural,powder coating. It is a highly durable, attractive finish with superb resistance to corrosion,heat, impact, abrasion and fading. The standard colour is Bleu 700 Sable but many other colours are available as a cost option in this high quality range of coatings.Beneath the paint finish, all steel parts are Nitro-Carburised. This is a low temperature treatment, which makes the material highly corrosion resistant.

Operating Instructions

calling and operating the lift from the Lower Level

If the lift is away from the lower level, press and hold the bottom of the rocker switch (down call) as indicated above.	As the lift descends, a safety skirt around the bottom of the platform prevents the lift from trapping objects as the lift reaches the lower level. If this safety edge is activated, the lift will stop. In this eventuality, press the up button, clear the obstruction and continue the descent.

As the lift reaches the lower level there will be a slight pause and the ramp will deploy automatically.	If there is an obstruction beneath the ramp as it deploys, the ramp will stop. Once the obstruction has been cleared, the ramp will continue to deploy.

On entering the lift, ensure that you are central on the platform. Press and hold the right hand side of the switch (up call) as indicated above.	On arrival at the upper level push the gate within 15 seconds and exit the lift. If you do not open the gate within 15 seconds the gate will re-lock. To re-activate the timer, press the up button once again.

Calling the Lift from Upper Level

If the lift is away from the Upper level, press and hold the bottom of the rocker switch as indicated above. If the lift is already parked at the upper level with the gate closed, press the up button to activate the lock release and then pull the gate open.	Ensure that the gate is fully closed and press and hold the down button as shown in Fig 8 above.

As the lift reaches the lower level there will be a slight pause and the ramp will deploy automatically.

In Car Emergency Lowering

In the event of a power failure the platform can be lowered to the ground floor by operating the push button as you would in normal operation.
The lift incorporates a battery back up system that allows for the travelling platform to be operated up to 15 complete cycles in the event of a power failure.

Manual Lowering

In the event of mains power and battery failure, the lift can be simply lowered to the ground floor by operating the emergency-lowering valve located on the side panel below the lift control console. See Fig 10
Ensure power to the lift is turned off and the emergency stop button is pressed before executing this procedure. After using the emergency-lowering valve, twist and release the emergency stop button and restore power to the lift.

Gate/Door Not Opening

Insert the gate release key into its keyway as shown in Fig 11, twist approx. ¼ turn. This will release the door mechanism lock and the gate can be pulled open. Note: It is recommended you keep the door release key in a convenient place in case of an emergency.

Supra Linea

Vector Lift

Vector-Product Information

Features

Standard Configuration

• Lifting ring
• Guide rail frame, shaft components, platform, doors and shaft cladding
• Standard travel 3000 mm
• 400 Kg load maximum
• Speed 0.15 m/s – as maximum allowed
• Max. travel 9 meters
• Platform size 1480 mm deep x 1000 mm wide
• Required floor area 1600 mm deep x 1375 mm wide (through floor
  applications aperture required 1630 mm deep x 1405 mm wide)
• No pit required, advised a 5 cm recession
• Self-closing doors
• Overload device
• Pressure sensitive safety edges on the platform edges and top of the platform
  Control console
• Colours: white RAL9003(parts); blue (floor covering)
• 415V 3-Phase, 50/60Hz
• 16A fuse, delayed
• Motor power 2.2 kW
• CE-approved - Machine Directive
• Delivery time about 6-8 weeks

Shaft Colour	Floor Covering Standard colour	Control Panel	Call Station

Platform features

• Platform size 1480 mm deep x 1000 mm wide
• Aluminium control panel, which provides information about approval, max. load, manufacturer, and overload signal
• Anti-slip floor covering, colour Grey (518223) and Dark Blue (518263) (see picture)
• Handle
• Call and send button adjacent to the entrance
• Full Door (900x2000mm)
• Door closer

Controls

• User interface

-  Two circuits: -  one 24V and one 48V
-  'Hold to run' destination buttons (and control for emergency lowering
system)
-  On board alarm call and emergency stop button
-  Alarm call button:  -               Yellow
-  Emergency stop button:        Red

• Call station

-   'Hold to run' button (down)

Dimentions

• Dimensions are also included in the technical data sheet. On site feasibility is discussed in chapter 6.

(*)Depending on travel/top
height

Unique Selling Points

Design

• Selfstanding

- Everything within the same box
- No external motorbox required

• Fully closed shaft

• Modern design
• Door can be fitted on both left and right side, without major adjustments.
• Lift is suited for both persons with or without a wheelchair

• Solid and proven driving system
• Silent operation
• Easy to use

• Very easy to install, thus competitive cost
• Designed with easy servicing in mind

Quality approvals

• CE -Machine Directive
• 24 months warranty

Cost

• Price competitive with all comparable products

Emergency Lowering System

• Separate motor to lower the lift downstairs at a power failure
• Activated with the 'emergency lowering' button on the control panel

Available options

Platform

• 4 different platform sizes (standard included):

-  1280x1000
-  1480x1000 (standard)
-  1480x1100
-  1980x1000

• Armstrong "Protech" Colour Range for floor covering (See picture)

−  Red                            (518413)
−  Dark Green                (518613)
−  Light Green                (518623)
−  Dark Brown               (518933)
−  Light Brown               (518923)
−  Light Blue                   (518253)

• Remote control IR/Radio (See picture)

• Fold down seat

• Elbow push button

• Tactile push button (with ingravement)

• Flush push button (Stainless steel)

• Handle (Stainless steel -> same shape)

• Handrail (Stainless steel -> tube)

Doors

• 6 different types of doors (See picture):

• Door height 1900 or 2100 mm

• Doors on the long side

• Automatic door opener

• Hidden door closer

• Stay open facility door closer/opener (Hold open arm)

Shaft

• Ceiling with light fitting

• Glass panels on long and / or short side of shaft

• Tinted Glass

• Painting in other RAL colour (doors included)

• L-bracket

• Outdoor unit, up to -5 degrees Celsius (See also document Access Vector -

Outdoor installation). An outdoor unit has got the following extra's:
-  Roof with listings
-  One size fits on 1480x1000 and 1480x1100 platforms, side entrances
-  Not available for 1980x1000 or 1280x1000 platforms
-  Ceiling with lighting (Separately calculated)
-  Cladded machine side (Separately calculated)
-  Sealed cabinet door
-  Shaft walls filled with plastic foam (instead of stone wool)
-  Painted white, special outdoor colour (RAL 9003)
-  Only available in white
-  Stainless steel doors, painted white
-  Door Type GL (large glass)
-  Inner guide rails chromated
-  All joints sealed after installation
-  Pit with drainage (prepared by customer)
(!) Adjacent entrances can not be ordered at an outdoor unit
(!) Fire doors are not well suited or rust protected and are not
recommended for outdoor use.

Drive

• Soft start

• Single phase frequency control

• Increased capacity to 630 kg

• Key control on doors (always in combination with school locking) and platform

• School Locking to avoid unauthorised use (always in combination with key controls on doors)

• Emergency telephone on platform

• Automatic emergency dialler

• Smart Call

• Jacket (for Swedish phone socket)

• Automatic emergency lowering system

• Future Stainless Steel Lift (indoor) - polished/brushed stainless steel surfaces on doors,

• Hidden automatic door opener (Available 2004)

Floor Covering Colour Range	Remote Control	Hidden Door Closer	Outdoor Unit	Automatic Emergency Lowering System

Prices

• The price list differs from customer to customer thus the price sheet is distributed separately.

	The lift-door is executed with a big grab handle, for easy opening, upstanding or while seated in a wheelchair.		An optional telephone can be connected to the house phone-line to be used in case of an emergency.
	The control panel is simple to operate. Big floor buttons will function applying the hold-to-run principle. The lift is designed for 1 floor travel.		As option an automatic door-opener can be offered.The door can be opened using the call station and will automatically close after the user has entered. The door will open on arrival of the destination.
	For safety the lift has an emergency stop button, a overload alarm and an audio alarm.		The drive up slope is long to facilitate a very gradual incline of only 5 cm!
	The lift can carry a maximum of 400 Kg or 5 people. The platform can fit a normal wheelchair.		The lift has got a handrail,which gives the user a good grip when needed.
	The call station is mounted on the door (right picture) The call station can also be executed with a key control to avoid e.g. grandchildren from playing with the lift (left picture)		The doors can always beopened from the outside, for instance in ase of an emergency.