Series of non-enclosed Lifting Platforms
The Geo 1 Lifting Platform offers an aesthetically pleasing solution to the problem of short-rise vertical wheelchair transportation in public buildings (or, where appropriate, domestic situations).
Innovative design. Special emphasis has been placed on the needs of both lift user and the building owner in facilitating compliance with the current legislation for the disabled user / building provider.
Part M Building Regulations and Disability Discrimination Act Compliant
-
Suited to either inside or outside applications
-
Lifting heights up to 2 metres (3 metres for domestic use)
-
240 single phase supply with battery back up option
-
Direct acting hydraulic drive
-
Emergency lowering facility
-
Powered gates option
-
250 / 500kg rated load
-
No enclosure or support tower required
-
Integral ramp eliminates requirement for pit - minimises building work
Geo 1 standard specification:
|
Application range |
Ambulant and Wheelchair users. Internal & External Locations |
|
Rated load |
250 Kg |
|
Maximum travel |
1 Metre (1000mm) |
|
Rated speed |
0.06 m/s |
|
Power supply Electrical requirements |
220/240V~50/60 Hz-680mA (max) |
|
Low voltage operating system The lift has full battery back-up for emergency lowering |
24VDC |
|
Operating temperature range |
-20°C to +40°C |
|
Safety |
Full platform safe edge which stops the lift should it touch any obstacle |
Geo 2 standard specification:
|
Application range |
Ambulant and Wheelchair users. Internal & External Locations |
|
Rated load |
500 Kg |
|
Maximum travel |
2 metre (2000mm)
3 Metre (3000mm) for domestic
use only |
|
Rated speed |
0.08 m/s |
|
Power supply Electrical requirements |
220/240V~50/60 Hz-680mA(max)
Dedicated RC protected supply |
|
Low voltage operating system The lift has full battery back-up for emergency lowering |
24VDC |
|
Operating temperature range |
-20°C to +40°C |
|
Safety |
Pressure sensitive surface which stops the lift should it
touch an obstacle |
|
.jpg)