GEO 1 Lifts

Series of non-enclosed Lifting Platforms

The Geo 1 Lifting Platform offers an aesthetically pleasing solution to the problem of short-rise vertical wheelchair transportation in public buildings (or, where appropriate, domestic situations).

Innovative design. Special emphasis has been placed on the needs of both lift user and the building owner in facilitating compliance with the current legislation for the disabled user / building provider.

Part M Building Regulations and Disability Discrimination Act Compliant

  • Suited to either inside or outside applications
  • Lifting heights up to 2 metres (3 metres for domestic use)
  • 240 single phase supply with battery back up option
  • Direct acting hydraulic drive
  • Emergency lowering facility
  • Powered gates option
  • 250 / 500kg rated load
  • No enclosure or support tower required
  • Integral ramp eliminates requirement for pit – minimises building work

P1010024 P1010027 P1010029

Geo 1 standard specification:Geo 1- spec 2

Application range Ambulant and Wheelchair users. Internal & External Locations
Rated load 250 Kg
Maximum travel 1 Metre (1000mm)
Rated speed 0.06 m/s
Power supply Electrical requirements 220/240V~50/60 Hz-680mA (max)
Low voltage operating system The lift has full battery back-up for emergency lowering 24VDC
Operating temperature range -20°C to +40°C
Safety Full platform safe edge which stops the lift should it touch any obstacle

Geo 1- spec1 Geo 1- spec 3

Geo 2 standard specification:Geo 2- spec1

Application range Ambulant and Wheelchair users. Internal & External Locations
Rated load 500 Kg
Maximum travel 2 metre (2000mm)
3 Metre (3000mm) for domestic
use only
Rated speed 0.08 m/s
Power supply Electrical requirements 220/240V~50/60 Hz-680mA(max)
Dedicated RC protected supply
Low voltage operating system The lift has full battery back-up for emergency lowering 24VDC
Operating temperature range -20°C to +40°C
Safety Pressure sensitive surface which stops the lift should it
touch an obstacle

oner